Factory Fire, Computer Rd, Yatala - 20/01/06

At approximately 1020hrs crews were turned out to factory fire at PR Flooring, Computer Rd, Yatala. Initially one pump was in attendance and requested a make pumps 6. Further crews were turned out at this point as the fire became a make pumps 10. Crews on scene were 635a (pump), 641a (pump), 638a (pump), 631j (tap), 636a (pump), 635m (ic), 642a (pump), 850o (hazmat), 502i (bronto skylift), 517a (pump), 510a (pump), as well as many area director vehicles.
At 1150hrs the QPS declared the area an emergency situation due to the large plumes of smoke, and began evacuating the area.
At approximately 1440 the firewalls had collapsed over the fire and an excavator was needed to get to the fire for further control.
Crews are still on scene as at 1915hrs and are expected to be on scene for quite some time. An excellent job was done by all to contain the fire to one part of the building. Thankyou to Area Director Ryan and Area Director Mutzelberg for allowing me to photograph the incident.
The rest of the photographs can be found in the following gallery:
http://www.firefighters.com.au/gallery2 ... oryyatala/
cheers
At 1150hrs the QPS declared the area an emergency situation due to the large plumes of smoke, and began evacuating the area.
At approximately 1440 the firewalls had collapsed over the fire and an excavator was needed to get to the fire for further control.
Crews are still on scene as at 1915hrs and are expected to be on scene for quite some time. An excellent job was done by all to contain the fire to one part of the building. Thankyou to Area Director Ryan and Area Director Mutzelberg for allowing me to photograph the incident.











The rest of the photographs can be found in the following gallery:
http://www.firefighters.com.au/gallery2 ... oryyatala/
cheers