Panorama of Gladesville BridgeModerators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators
Forum rules
Please note that image critiquing is a matter of give and take: if you post images for critique, and you then expect to receive criticism, then it is also reasonable, fair and appropriate that, in return, you post your critique of the images of other members here as a matter of courtesy. So please do offer your critique of the images of others; your opinion is important, and will help everyone here enjoy their visit to far greater extent. Also please note that, unless you state something to the contrary, other members might attempt to repost your image with their own post processing applied. We see this as an acceptable form of critique, but should you prefer that others not modify your work, this is perfectly ok, and you should state this, either within your post, or within your signature. Images posted here should conform with the general forum guidelines. Image sizes should not exceed 950 pixels along the largest side (height or width) and typically no more than four images per post or thread. Please also ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.
Previous topic • Next topic
8 posts
• Page 1 of 1
Panorama of Gladesville Bridge...
Last edited by leek on Tue Sep 05, 2006 11:42 pm, edited 1 time in total.
Cheers, John
Leek@Flickr | Leek@RedBubble | Leek@DeviantArt D700; D200; Tokina 12-24; Nikkor 50mm f1.4,18-70mm,85mm f1.8, 105mm,80-400VR, SB-800s; G1227LVL; RRS BH-55; Feisol 1401
Good pano work. Looks like you would have had significant exposure difference between LHS and RHS - how did you handle that?
I agree that it's not the most riveting of subjects, but a good one for learning panos.
Hi John,
What settings did you use in Autostitch and how long did it take to do the job? I find that at it's default settings the resolution is too low but when I bump it up it is very slow. Nice job on the pano. __________
Phillip **Nikon D7000**
I had an uncle who could do that. It is an interesting bridge though. Just goes to show that even with concrete, it is still possible to create an ugly monstrosity like that one. They don't make bridges like they used to, that's for sure. Still, it's better than the Citylink bridge in Melbourne with it's two way-out-of-proportion vertical cheesesticks. Oh, and nice pano too. Steve.
|D700| D2H | F5 | 70-200VR | 85 1.4 | 50 1.4 | 28-70 | 10.5 | 12-24 | SB800 | Website-> http://www.stevekilburn.com Leeds United for promotion in 2014 - Hurrah!!!
cricketfan: I didn't adjust the exposure... autostitch usually does a good job of blending it all together on its own... (but now that you mention it, the RHS does seem a tad underexposed).
philipb: The only setting I've experimented with so far is Output scale and this time I set it to 100%. From 3x5Mb JPGs it created one 7.1Mb JPG (so how is that 100%?) The job took just over a minute to generate the output file... Glen: No, didn't do that... I had the camera on Aperture and the LH & middle photos were taken at 1/320s F9 and the RHS was taken at 1/250s... kipper: I tried to start one [url=http://forum.d70users.com/viewtopic.php?t=2122]here[/b] but was referred to an excellent tutorial site... see link in thread... I have used the Pano feature within Photoshop, but find that autostitch gives better results with little or no effort... killakoala: It may be concrete, but the arch section is actually hollow - an intrepid young cave-clanner that I know has been inside it and took some photos... I'll try to find them and post a link... sirhc55: yep - i was cruising around hunters hill and came across this vantage point that I hadn't seen before... Thanks for the comments guys... Cheers, John
Leek@Flickr | Leek@RedBubble | Leek@DeviantArt D700; D200; Tokina 12-24; Nikkor 50mm f1.4,18-70mm,85mm f1.8, 105mm,80-400VR, SB-800s; G1227LVL; RRS BH-55; Feisol 1401
Previous topic • Next topic
8 posts
• Page 1 of 1
|