How to stop blur at the extremes of an image?

Got a thin skin? Then look elsewhere. Post a link to an image that you've made, and invite others to offer their critiques. Honesty is encouraged, but please be positive in your constructive criticism. Flaming and just plain nastiness will not be tolerated. Please note that this is not an area for you to showcase your images, nor is this a place for you to show-off where you have been. This is an area for you to post images so that you may share with us a technique that you have mastered, or are trying to master. Typically, no more than about four images should be posted in any one post or thread, and the maximum size of any side of any image should not exceed 950 px.

Moderators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators

Forum rules
Please note that image critiquing is a matter of give and take: if you post images for critique, and you then expect to receive criticism, then it is also reasonable, fair and appropriate that, in return, you post your critique of the images of other members here as a matter of courtesy. So please do offer your critique of the images of others; your opinion is important, and will help everyone here enjoy their visit to far greater extent.

Also please note that, unless you state something to the contrary, other members might attempt to repost your image with their own post processing applied. We see this as an acceptable form of critique, but should you prefer that others not modify your work, this is perfectly ok, and you should state this, either within your post, or within your signature.

Images posted here should conform with the general forum guidelines. Image sizes should not exceed 950 pixels along the largest side (height or width) and typically no more than four images per post or thread.

Please also ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.

How to stop blur at the extremes of an image?

Postby shazzm on Sat Nov 29, 2008 8:46 pm

I have a picture of my dad (which is very unusual as he is cameraphobic lol), but i seem to only focus in the centre of the picture.... any suggestions on keeping the whole image in focus? Thanks

nikonD60 f/5.6 1/125 sec. ISO 400 55-200 lens

Image

http://www.flickr.com/photos/sharynmayne/3067114853/
shazzm
Newbie
 
Posts: 13
Joined: Fri Nov 21, 2008 12:09 am
Location: Davoren Park, South Australia

Re: How to stop blur at the extremes of an image?

Postby chrisk on Sat Nov 29, 2008 9:24 pm

stop the aperture down some more. try f11 next time. the smaller the aperture the greater the DOF.
EM1 l 7.5 l 12-40 l 14 l 17 l 25 l 45 l 60 l 75 l AW1 l V3
User avatar
chrisk
Senior Member
 
Posts: 3317
Joined: Fri Mar 09, 2007 8:50 pm
Location: Oyster Bay, Sydney

Re: How to stop blur at the extremes of an image?

Postby aim54x on Sat Nov 29, 2008 9:29 pm

Rooz wrote:stop the aperture down some more. try f11 next time. the smaller the aperture the greater the DOF.


Beaten to it, Rooz it right on. You have used the lens wide open and focused very close (for this lens anyway) hence your depth of field is fairly small. Stopping it down will help to grab you some more DOF.
Cameron
Nikon F/Nikon 1 | Hasselblad V/XPAN| Leica M/LTM |Sony α/FE/E/Maxxum/M42
Wishlist Nikkor 24/85 f/1.4| Fuji Natura Black
Scout-Images | Flickr | 365Project
User avatar
aim54x
Senior Member
 
Posts: 7305
Joined: Fri Feb 01, 2008 10:13 pm
Location: Penshurst, Sydney

Re: How to stop blur at the extremes of an image?

Postby blacknstormy on Sat Nov 29, 2008 10:11 pm

flikr is doing bad things - have no photo :(
Dodging and burning are steps to take care of mistakes God made in establishing tonal relationships! -Ansel Adams

http://www.redbubble.com/people/blacknstormy
User avatar
blacknstormy
Senior Member
 
Posts: 2745
Joined: Wed Dec 29, 2004 3:33 pm
Location: Ipswich Qld

Re: How to stop blur at the extremes of an image?

Postby [kane] on Sat Nov 29, 2008 10:32 pm

Same as above, but I'd add one thing, use f22 and a tripod, as the lower (higher number) the f stop the less light, so at this close crop you might get some blur.

Good luck, great shot btw, very sharp.
============================================
Thanks, talk soon, my Flickr;
http://www.flickr.com/photos/kanegledhill/
User avatar
[kane]
Member
 
Posts: 69
Joined: Sun Sep 28, 2008 3:55 pm
Location: Brisbane, Australia.

Re: How to stop blur at the extremes of an image?

Postby DaveB on Sat Nov 29, 2008 10:54 pm

Just in case it's not clear, the problem here isn't that the areas towards the edge of the frame are out of focus, but just that the in-focus area is a fixed distance from the camera. The smaller the aperture (the larger the value) the greater the depth of in-focus areas in front of and behind that distance...
User avatar
DaveB
Senior Member
 
Posts: 1850
Joined: Wed Aug 31, 2005 10:57 pm
Location: Box Hill, Vic

Re: How to stop blur at the extremes of an image?

Postby shazzm on Sun Nov 30, 2008 12:04 am

oh yeah, I see what u mean... i just took a shot at f5.6 then one at f32 and it makes a big difference. Thanks guys, that was helpful. With help like that I won't be a newbie for long lol
shazzm
Newbie
 
Posts: 13
Joined: Fri Nov 21, 2008 12:09 am
Location: Davoren Park, South Australia

Re: How to stop blur at the extremes of an image?

Postby aim54x on Sun Nov 30, 2008 12:19 am

shazzm wrote:oh yeah, I see what u mean... i just took a shot at f5.6 then one at f32 and it makes a big difference. Thanks guys, that was helpful. With help like that I won't be a newbie for long lol


Glad to hear that we have helped someone, keep the questions coming, so we can all learn!!!
Cameron
Nikon F/Nikon 1 | Hasselblad V/XPAN| Leica M/LTM |Sony α/FE/E/Maxxum/M42
Wishlist Nikkor 24/85 f/1.4| Fuji Natura Black
Scout-Images | Flickr | 365Project
User avatar
aim54x
Senior Member
 
Posts: 7305
Joined: Fri Feb 01, 2008 10:13 pm
Location: Penshurst, Sydney

Re: How to stop blur at the extremes of an image?

Postby Matt. K on Sun Nov 30, 2008 5:11 pm

Just one other point....you have focused on the end of his nose....there is nothing in front of his nose but there is some lens sharpnes (depth of field) not being used in front of his nose. If you had focused on his eyes then the tip of his nose would still have been reasonably sharp and the edges of the frame would have been sharper because the available DOF would have been moved backwards. I hope this makes sense to you.
Regards

Matt. K
User avatar
Matt. K
Former Outstanding Member Of The Year and KM
 
Posts: 9981
Joined: Mon Sep 06, 2004 7:12 pm
Location: North Nowra


Return to Image Reviews and Critiques