10D lens compatibility
Posted: Sat Feb 10, 2007 7:05 pmJust wondering if the canon 24-105mm f/4L IS USM & Tokina 12-24mm is compatible with the 10D. I tried googling it but no success
Thanks y'all
Thanks y'all
DSLRUsers.com
A discussion forum - and more - for users of Digital Single Lens Reflex cameras.
https://d70users.net/
10D lens compatibility
Page 1 of 1
Posted: Sat Feb 10, 2007 7:05 pmPosted: Sat Feb 10, 2007 7:21 pmYes they are
Posted: Sat Feb 10, 2007 7:29 pmkewwwwwwwwwwl thanks pharma
Posted: Sat Feb 10, 2007 7:57 pmI guess with the Tokina there could be a question, although it came out after the 10D so any surprises about compatibility would be weird: 3rd-party manufacturers such as Sigma/etc generally only get caught by later camera models.
As for the Canon EF 24=105mm/4 L IS USM, it's a Canon EF therefore it will work with all EOS bodies. The EF-S lenses only work with the 300D/350D/400D/20D/30D (and probably the 40D if that's the up-coming replacement for the 30D
) but the EF lenses work with all EOS bodies!
As for the Canon EF 24=105mm/4 L IS USM, it's a Canon EF therefore it will work with all EOS bodies. The EF-S lenses only work with the 300D/350D/400D/20D/30D (and probably the 40D if that's the up-coming replacement for the 30D
) but the EF lenses work with all EOS bodies!Posted: Sun Feb 11, 2007 8:47 amNOTE: EF-S lenses will not work on the 10d body
Jonathan
Jonathan
Posted: Sun Feb 11, 2007 10:32 amJon, isn't that what I said?
Posted: Sun Feb 11, 2007 12:42 pmrather!
I didnt read your post close enough... sorry!
J
I didnt read your post close enough... sorry!
J
Posted: Sun Feb 11, 2007 6:10 pmsweet thanks for the reply folks. Didnt know about the EF and EF-S Lenses
Posted: Sun Feb 11, 2007 8:07 pmBollocks. The mount can be modified to workjdear wrote:NOTE: EF-S lenses will not work on the 10d body
I had an EF-S 18-55 kit lens on my 10D for a while.Posted: Sun Feb 11, 2007 8:59 pmpetal666 wrote:I had an EF-S 18-55 kit lens on my 10D for a while.
Yes the 18-55mm can be modified (with epoxy and a hacksaw!) to fit the 10D. But it's not officially supported.
On the 18-55 the rear lens doesn't protrude far enough into the mirror box to hit the 10D's mirror, and by removing some of the plastic/rubber parts of the lens you can make it mount. I did this to the 18-55 that came with my 20D (I sold it with my old D30 as a kit).
Most (all?) of the other EF-S lenses are not modifiable in this way.