lens movement

A place for us to talk about Nikon related camera gear.

Moderator: Moderators

Forum rules
Please ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is. Please also check the portal page for more information on this.

lens movement

Postby Raskill on Sun Oct 28, 2007 1:48 pm

Ahoy all,

Maybe someone out there has had this issue and can help.

One of my D2h bodies has an annoying ability, it can let the lens move, when mounted, about .5 millimetres. Enough to loose contact with the lens and not allow focus. It does it with all my lenses, so it is definetly that body.

Now, looking at it, I need a new mounting ring. Hears the question....

Is it likely to be be expensive? Or should I just put up with it? Also, is there anywhere in Sydney for Nikon repairs that isn't maxwells (or it's new name)?

Cheers!
2x D700, 2x D2h, lenses, speedlights, studio, pelican cases, tripods, monopods, patridges, pear trees etc etc

http://www.awbphotos.com.au
User avatar
Raskill
Senior Member
 
Posts: 2161
Joined: Fri Jun 17, 2005 12:26 pm
Location: Rockley, near Bathurst, Home of Aussie Motorsport!

Postby moggy on Sun Oct 28, 2007 5:09 pm

A few of the guys have had good experiences with Poraday at Bondi, ph.02-9387-4088. Nikon Australia are expensive as I found out to my cost. :cry:

8)
Bob.

I used to be indecisive..but now I'm not so sure.


Nikon D300 + Glass + Stuff
User avatar
moggy
Senior Member
 
Posts: 852
Joined: Mon Jul 25, 2005 6:00 pm
Location: Castle Hill, Sydney. - Fixed D70s

Postby gstark on Sun Oct 28, 2007 5:17 pm

Poroday is the official Nikon repairer for NSW.

Whilton on Elizabeth St are, AFAIK, independent, but that might also mean that they don;t have the expertise or specialised hardware to work on the newer models.
g.
Gary Stark
Nikon, Canon, Bronica .... stuff
The people who want English to be the official language of the United States are uncomfortable with their leaders being fluent in it - US Pres. Bartlet
User avatar
gstark
Site Admin
 
Posts: 22918
Joined: Thu Aug 05, 2004 11:41 pm
Location: Bondi, NSW

Postby Matt. K on Sun Oct 28, 2007 5:34 pm

Raskill
That's a very unusual problem for a Nikon Camera. Can you see any signs of wear? Is the stainless steel mount on the camera loose? When you press the lens release button do the locking pin and focus screw pop in and out OK? Is the looseness side to side (left/right movement) or does the lens come away from the bayonett mount? IE. can you slip the edge of a sheet of paper in between the camera and the lens?
Regards

Matt. K
User avatar
Matt. K
Former Outstanding Member Of The Year and KM
 
Posts: 9981
Joined: Mon Sep 06, 2004 7:12 pm
Location: North Nowra

Postby Yi-P on Sun Oct 28, 2007 5:35 pm

That is strange, Im looking at my D2H now and I find that it does feel to have a very very tiny bit of movement, but not that it affects performance of lenses... I guess its better to send off to a service centre for a check up

Regarding repairers...
Another thumbs up vote for Poraday...

My D2H rubber grip, shutter and other piece and bits are fixed/replaced within 4 days... Nikon Aus (or Maxwell) took 8months to fix my F80's circuit board and focusing screen (broken).
User avatar
Yi-P
Senior Member
 
Posts: 3579
Joined: Mon Jul 25, 2005 1:12 am
Location: Sydney -- Ashfield

Postby Raskill on Sun Oct 28, 2007 9:07 pm

Thanks folks. Ill give Poradays a call.

Matt, I'll have a play with it and see if I can tighten any screws myself first.

P.S. hope this post works, i'm posting it via my laptop through a mobile phone (very technological!)
2x D700, 2x D2h, lenses, speedlights, studio, pelican cases, tripods, monopods, patridges, pear trees etc etc

http://www.awbphotos.com.au
User avatar
Raskill
Senior Member
 
Posts: 2161
Joined: Fri Jun 17, 2005 12:26 pm
Location: Rockley, near Bathurst, Home of Aussie Motorsport!


Return to Nikon