Blocking pop-up flash in commander mode
Posted: Tue Feb 26, 2008 9:11 amHi,
This little device can prove useful to those that want to use the built in flash for commander mode but don't want the built in flash to affect the lighting. We had a situation like this at the recent lighting workshop. The SG-31R will block the pre-flash as well as the flash itself while still letting the IR signal through to trigger your sb800/sb600. Pretty cheap at $12USD, likely also available on ebay.
http://www.adorama.com/INKSG31R.html
If you have an old SU-4, you can modify the diffuser screen for it as they did below:
http://www.bermangraphics.com/digicam/sg-2.htm
HTH someone.
Cheers,
André
This little device can prove useful to those that want to use the built in flash for commander mode but don't want the built in flash to affect the lighting. We had a situation like this at the recent lighting workshop. The SG-31R will block the pre-flash as well as the flash itself while still letting the IR signal through to trigger your sb800/sb600. Pretty cheap at $12USD, likely also available on ebay.
http://www.adorama.com/INKSG31R.html
If you have an old SU-4, you can modify the diffuser screen for it as they did below:
http://www.bermangraphics.com/digicam/sg-2.htm
HTH someone.
Cheers,
André