Page 1 of 1
18-200mm VR Lens seals
Posted:
Wed Feb 18, 2009 10:37 pmby V-man
Hi guys . while using my Nikkor 18-200mmVR two days ago the front element unscrewed itself and fell out. thank god it fell onto thick grass. well i quickly cleaned it and screwed it back on. My question is - straight under the front glass are 3 metal seal's , (like a thin washer) all are the same size but 2 are the same thickness and one is much thinner (fragile). Does anyone know what order they go back in? I went to my local camera house but they didn't know.
Re: 18-200mm VR Lens seals
Posted:
Wed Feb 18, 2009 11:20 pmby biggerry
unscrewed itself and fell out.
OMG
Re: 18-200mm VR Lens seals
Posted:
Thu Feb 19, 2009 8:54 amby idleowen
Cant help you with your question but coincidently the front of my 18-200 fell off 3 weeks ago,not the element but the filter/lens cap housing.Looks to have 8 micro screws that connect to the front of the lens ,hidden underneath a seal.Wouldnt have helped that I dropped the lens 6mnths ago and have sometimes 'rested' the camera with lens hood in place(putting pressure on the hood),so lesson learnt.Not sure why 8 screws would loosen so much though................Anyway a visit to Nikon Service (Auburn) and 3 days later a quote for $75 to repair/service the lens,not a bad deal! Just need to wait 3-4wks for somebody to do the work.
Nigel
Re: 18-200mm VR Lens seals
Posted:
Sun Mar 15, 2009 2:57 pmby darklightphotography
I imagine the 3 shims are to provide correct spacing between elements, and that the order would not matter. Are you sure they were all inside the glass?
Re: 18-200mm VR Lens seals
Posted:
Wed Mar 18, 2009 11:43 pmby V-man
darklightphotography wrote:I imagine the 3 shims are to provide correct spacing between elements, and that the order would not matter. Are you sure they were all inside the glass?
Yes they came out with the front element. Your probably right! All seems good now, i put them back in and everything back to normal. I learnt from it ,as i now check all my glass.
