Grain, Noise and the stamping out of mistaken terminology.

Have your say on issues related to using a DSLR camera.

Moderator: Moderators

Forum rules
Please ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.

Grain, Noise and the stamping out of mistaken terminology.

Postby whiz on Thu May 11, 2006 8:24 am

In reference to the image quality you can discern when using high ISO film, the particles that comprise the light sensitive emulsion get bigger. (not so much in later technolgy film)
The resulting image quality degradation is discernable because of this size increase. The bits that make the picture up are bigger. This quality is referred to as "grain"

With digital cameras, the bits that are sensitive to light never change in size. However with current technology, the level of amplification required, combined with manufacturing variation and differing environmental conditions make consistant responses from the image sensor able to be seen in the manner of significant variation in an image.
This is known as "noise" as it is a spurious variation in signal level.

So if you think that calling your digital camera's memory cards "film" is appropriate, you are of the same level of correctness as calling noise, "grain"

Now I know that some of you people steadfastly refuse to acknowledge change in various areas of your life.

If you are of the mind that computers are not "adding machines" and that the universe does not actually revolve around the earth, surely you can let go of this notion and move forward.

(Yes, this is a deliberately hotly provocative thread and I invite attempts to cling to the past.)
People put way too much rubbish in signature blocks.


Image
whiz
Member
 
Posts: 203
Joined: Thu Apr 28, 2005 7:28 pm
Location: Richardson, Canberra

Postby Oneputt on Thu May 11, 2006 8:35 am

???????????????Your point is?????????????
"The good thing about meditation is that it makes doing nothing respectable"

D3 - http://www.oneputtphotographics.com
User avatar
Oneputt
Senior Member
 
Posts: 3174
Joined: Tue Jan 04, 2005 3:58 pm
Location: Stuck in traffic Maroochydore.

Postby PiroStitch on Thu May 11, 2006 8:50 am

Not sure what your point here is, but if you are referring to people calling noise as "grain" well then call me guilty :P

When I refer noise as grain, it is merely an observation that it reminds me of film grain.

Am I an anti-change person? No. Does that make me less knowledgeable? No.

From the number of posts I've read, I have yet to see someone cling on to the past and refer to CF cards as film, etc.
Hassy, Leica, Nikon, iPhone
Come follow the rabbit hole...
User avatar
PiroStitch
Senior Member
 
Posts: 4669
Joined: Sat Mar 05, 2005 1:08 am
Location: Hong Kong

Re: Grain, Noise and the stamping out of mistaken terminolog

Postby Mitchell on Thu May 11, 2006 9:16 am

Isn't the point of language to communicate?
If there is general understanding of what is meant by 'grain' in digital image, why get upset by the use of the word?

Call me past clinger, but I don't care whether you call it grain or noise - I'll still know what you mean 8)
User avatar
Mitchell
Member
 
Posts: 238
Joined: Tue Feb 07, 2006 3:16 am
Location: Île Saint Louis, Paris

Postby Aussie Dave on Thu May 11, 2006 10:09 am

I can see where you're coming from Whiz, though I'm not sure if the tone in your post is justified (IMO).....unless this is coming from a previous thread I'm not aware of ?!?

And in reference to a CF card being like film, that depends on how you look at it. They are both recording media for images, even though they are completely different in their operation.

There are so many misconceptions with digital photography, you have only named a few. I can see that the more we perpetuate the misconception, the more people think it is correct....but that's life.

That being said, at least we now all know the true meanings. Looks like we've all learnt our lesson for today :wink:
Dave
Nikon D7000 | 18-105 VR Lens | Nikon 50 1.8G | Sigma 70-300 APO II Super Macro | Tokina 11-16 AT-X | Nikon SB-800 | Lowepro Mini Trekker AWII
Photography = Compromise
User avatar
Aussie Dave
Senior Member
 
Posts: 1427
Joined: Sun Nov 21, 2004 1:40 pm
Location: West. Suburbs, Melbourne [Nikon D7000]

Postby whiz on Fri May 12, 2006 11:13 am

Well, sometimes storms in teacups are hard to stir up.

There is no reference to any particular post in this forum. Just trying this out on the general public here before posting this somewhere else...

Muhahahahaha..... <-- Evil laugh fades . Whiz exits stage right.
People put way too much rubbish in signature blocks.


Image
whiz
Member
 
Posts: 203
Joined: Thu Apr 28, 2005 7:28 pm
Location: Richardson, Canberra

Postby Marty on Fri May 12, 2006 11:29 am

Whiz,
I also don’t get the point of your thread.
I do fully understand the technicalities you are trying to convey, but the style of your post doesn’t do anything for your argument.
I would much prefer to be out shooting then debating the correct or incorrect use of terminology.
Marty

I am now going out to press more buttons..!!!! :wink:
What does that button do....??
User avatar
Marty
Member
 
Posts: 436
Joined: Sun Nov 21, 2004 7:54 pm
Location: Queenscliff, Nth Beaches, Sydney

Postby sheepie on Fri May 12, 2006 12:30 pm

whiz wrote:Well, sometimes storms in teacups are hard to stir up

Perhaps if that was your intent then http://www.dpreview.com would be a better place to try ;) We tend to be much more interested in the real issues here.

I guess most people understand the technical difference between 'grain' and 'noise'. The reality, or at least general consensus, is probably an understanding that the effect noise has on an image is similar to the effect of grain on film.

Personally, I don't have too much of an issue with noise - there are times when it can be used to advantage.

I also have not seen too many instances on this forum where people have referred to 'grain' in their images rather than 'noise'. Sure, they have pointed out the similarity of the two, but to refer to digital noise as grain from the start? Can't say I've seen it happen here.
*** When getting there is half the fun! ***
User avatar
sheepie
Key Member
 
Posts: 3029
Joined: Sun Aug 08, 2004 11:56 am
Location: Picnic Point, Sydney Australia *** Nikon D200/D70 ***

Postby DionM on Fri May 12, 2006 7:57 pm

Sorry, I own a Canon, what is this digital grain/noise thing you refer to :wink: Must be a Nikon thing :lol:

Whatever it is called, I think we all know what it means. I would venture to suggest that even "noise" is incorrect, as it results from amplification of the signal ... so perhaps "gain byproducts" is a better description ...

Canon 20D and a bunch of lovely L glass and a 580EX. Benro tripod. Manfrotto monopod. Lowepro and Crumpler bags. And a pair of Sigma teleconverters, and some Kenko tubes.
http://www.dionm.net/
DionM
Senior Member
 
Posts: 898
Joined: Mon Aug 22, 2005 10:11 pm
Location: Holland Park, Brisbane

Postby Big V on Fri May 12, 2006 9:01 pm

Maybe the term hot pixels! That is what we call them in cooled astronomy cameras...
Canon
User avatar
Big V
Senior Member
 
Posts: 2301
Joined: Mon Apr 18, 2005 1:37 am
Location: Adelaide

Postby Suri on Fri May 12, 2006 9:15 pm

This is a topic that is embellished across the various internet DSLR forums, and is argued infinitum, and it is little wonder people get confused by it all.

Before Digital - when noise was grain, I used to delight in the creative possibilities that faster film provided, and accepted without question the end result of attempting photography in the dark. What is the hang up with a few bumps and bruises in the picture - allow for it, use the tool within the contraints of it's design and construct the image within this knowledge.

I wonder how many people didn't like Van Goghs' Art because he painted pictures that appeared blurry!?

Go back a few years and grain in a picture meant action and urgency almost a synonym for photographic speed and impressionism - now it seems to be merely a hotly debated camera defect, fit only for an engineered designed death.

What a pity!
D300, D200, (D70 - now with daughter) and heaps of Nikon stuff.
http://www.pbase.com/steven_hight
User avatar
Suri
Member
 
Posts: 122
Joined: Sun Nov 14, 2004 5:48 pm
Location: Redlands, Brisbane


Return to General Discussion