DSLRUsers.com

I have using this setup for a few months now.

In the last two months, I have had this error message and I am guessing it's not good...





So far I have tried to find that file and disable the read-only state. No go.

Any thing else I could try???

Thanks for your help!

OK Here is the log. It seems to be working??

Calibration:
** Dell 2007WFP (Digital)-1 **
* 29 days until recalibration

Log Information:
12/09/2010 10:51 PM - Application Launch
12/09/2010 10:51 PM - Monitor Configuration Changed
12/09/2010 10:51 PM - Monitor Appeared-- Dell 2007WFP (Digital)-1 ( 0, 0, 1680, 1050) 24 DI:YES
12/09/2010 10:51 PM -
12/09/2010 10:51 PM - Load Video Card LUT for Dell 2007WFP (Digital)-1 from profile -- > C:\Windows\system32\spool\drivers\color\Spyder3Express.icm
12/09/2010 10:51 PM - The calibration data from the profile was SUCCESSFULLY LOADED into the video card.
12/09/2010 10:51 PM -

My spyder came with a little utility called ProfileChooser.

If you have it, try running that. It allows you to pick what profile to use. You can also see what profiles DataColor sees.

Mine doesn't seem to have that utility though... I have a feeling that it may only for spyder2 users Thanks Ozeecho...

I've got Profile Chooser on a Spyder3 Pro.

Probably easiest to just delete all the profiles and recalibrate.

Thanks guys for your input.

I got some help from datacolor and it's all fixed.

surenj wrote:Thanks guys for your input.

I got some help from datacolor and it's all fixed.

Good to hear - but don't keep us all in suspense - what was the solution? (This might help if anybody else has the problem).

Cheers