spatula width for wet cleanModerator: Moderators
Forum rules
Please ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.
Previous topic • Next topic
17 posts
• Page 1 of 1
spatula width for wet cleani've often wondered why ppl use a spatula that is smaller than the width of the CCD to swipe forward, move down and swipe back.
is there any reason why a full width spatula and a single pass isn't more commonly seen or is everyone a copper hill copy cat
Re: spatula width for wet clean
samester, My guess is it would be very hard to have it of exactly the same fitting size. Also, you want to clean at the edges of the sensor on left and right hand sides. To do that you need to have a downward movement of somesort - can't be done easily with an exact-size spatula. Alex
Pls. note: Nikon CCD is 14mm width, so any homemade spatula with 14mm is worked well.
And Copperhill spatula is 14mm width, need two passes to clean the CCD, one pass may not well cleaned btw. Birddog114
VNAF, My Beloved Country and Airspace
Does anyone have the Copperhill Sensor Cleaning Kit (or spatula) and how have they found it to use ??
Dave
Nikon D7000 | 18-105 VR Lens | Nikon 50 1.8G | Sigma 70-300 APO II Super Macro | Tokina 11-16 AT-X | Nikon SB-800 | Lowepro Mini Trekker AWII Photography = Compromise
I have the SensorSwipe and made myself one with the Gloria Jeans coffee spatula, and it works like a champ. Nothing wrong with it. Birddog114
VNAF, My Beloved Country and Airspace
Hi Dave. I got on off him ages ago. An excellent and easy to use tool. Cheap also. Very pleasant guy to deal with. Alex
Hi Alex "him" as in Birdy ?? and "one" as in the Gloria Jeans version ? Dave
Nikon D7000 | 18-105 VR Lens | Nikon 50 1.8G | Sigma 70-300 APO II Super Macro | Tokina 11-16 AT-X | Nikon SB-800 | Lowepro Mini Trekker AWII Photography = Compromise
A 8 or 9mm spautula is best. You need to be able to drop it down for the wipeback. Also, the spatula should be slightly tapered so that it is wider at the top edge...yes, the cleaning edge. This will enable you to get it right on the edge of the CCD. If the taper goes the other way then the edge will never get wiped.
Regards
Matt. K
No, I thought you were talking about http://www.copperhillimages.com. I was referring to Nicholas and the proper tool Alex
Dave,
I do have the Copperhill spatula (14mm) and after about 4 attempts I finally got the sensor clean. It is like all things new, just took a little while to get into the swing of it I am now a seasoned 'CCD' cleaner and proud of it Birddog normally carries all the cleaning equipment with the exception of the spatula, so pay a visit to Gloria Jeans or try here fozzie
When people ask what equipment I use - I tell them my eyes.
Cheers Fozzie. I have actually been eyeing off the Copperhill Kit at QualityCameras. Just didn't want to outlay the money before finding out if others were happy with the kit. Sounds like it works just fine, so I might try and talk the wife into letting me buy it Dave
Nikon D7000 | 18-105 VR Lens | Nikon 50 1.8G | Sigma 70-300 APO II Super Macro | Tokina 11-16 AT-X | Nikon SB-800 | Lowepro Mini Trekker AWII Photography = Compromise
Dave,
I was after the 14mm spatula on it's own, but it looks like they only sell them in kit form. A bit exspensive for my liking so I just cut down a cheap rubber spatula from Coles and it works a treat. I had to clean the sensor, not from changing lenses, but because the sensor was dirty straight from the factory. It took a few goes to totally clean, but I got there in the end and now I don't have any blotches in pic's over f/16 and up. It's still clean even after changing lense's, so I can't see dust being a very high factor. Jase - 'Motorcycle Gallery' - 'Car Gallery'
I'm wondering why so many of you guy worrying a home made spatula,
does it harm to your CCD? Is it not compliant to the photographic industry? Make yourself one from many sources and you'll see a big smile on your face. Birddog114
VNAF, My Beloved Country and Airspace
Thanks for the comments everyone. I actually placed the order for the Copperhill Cleaning Kit from QualityCameras last night.
Am I a stooge ? Possibly, but I thought what the heck. The Copperhill method seems to be a favourite so I thought their products are obviously designed to work to their method. I am sure that home-made spatulas will work just as effectively, but I guess (for me) it's easier to buy the real-deal than trying to make my own..... Looks like the 70-200VR will just have to wait a little longer.... Dave
Nikon D7000 | 18-105 VR Lens | Nikon 50 1.8G | Sigma 70-300 APO II Super Macro | Tokina 11-16 AT-X | Nikon SB-800 | Lowepro Mini Trekker AWII Photography = Compromise
I guess you also get all the cleaning agent and cloths too, so you made a good investment. I wouldn't wait too long for the 70-200VR, apparently the prices are going through the roof!
Jase - 'Motorcycle Gallery' - 'Car Gallery'
Hi Jase yeah, I purchased the Ultimate dSLR cleaning kit, which is the sensor cleaning kit & lens cleaning kit all in one. The Sensor kit comes with Copperhill Spatula, Eclipse fluid, pec pads, cleaning cloth, tissue book, sensor sweep (which is a brush for loose CCD dust). The Lens Kit comes with MC Fluid (for multi-coated lenses & filters), lens tissue, retractable brush and cleaning cloth. It certainly should give me everything I need to keep the D70 in tip-top condition Dave
Nikon D7000 | 18-105 VR Lens | Nikon 50 1.8G | Sigma 70-300 APO II Super Macro | Tokina 11-16 AT-X | Nikon SB-800 | Lowepro Mini Trekker AWII Photography = Compromise
Previous topic • Next topic
17 posts
• Page 1 of 1
|