D70 Won't Turn Off...Moderator: Moderators
Forum rules
Please ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is. Please also check the portal page for more information on this.
Previous topic • Next topic
20 posts
• Page 1 of 1
D70 Won't Turn Off...hey there, just had a big day racing, and at the end of it, my D70 refuses to turn off. I have to take the battery out!
Need my cam tomorrow like i've never needed it before! Heaps of people want pics. Is it safe to keep taking the battery out with a lens attached? Cheers. Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
Was it just a once off or do you always need to pull the battery out?
Probably the best thing to do for the days shooting is not to turn the camera off at all. All of the modern Nikon DSLRs from the D100 onward use very little power when they're in power-on standby - in fact, it's only very slightly more than being powered off from everything I've read. I know I've accidently left my D70 in a bag for 2 weeks turned on, picked it up, and it still had enough charge to take the shots I wanted. There's been posts on changing lenses with the power on before, so you can probably search it out, but the general consensus was you can change lenses with the power on, but it's probably better to do it with the power off if you can. The most important thing is if you're taking the battery out to power off the camera, make sure the green CF memory activity light has gone out - you could end up with data corruption otherwise. You may want to try using the recessed reset button in the bottom of the camera - this will most likely fix the problem - I think this happened to my D70 once and it fixed it. But... if its working well enough, do what you have to, then fiddle with resets and whatever later
thanks mate. might try the reset button. probably reset firmware too?
i did turn it on and off quite a bit today but this is the first problem in 10 months since i've had it. Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
tried both reset modes with no luck. i think it's a physical problem with the switch, loose connection or something...
guess i have to just leave it on for the day. not sure how long the battery will last with the 70-200. won't be using VR i think. Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
mmm, as the reset didn't fix the problem, it sounds like it might need to go to the Nikon doctor for a checkup
Once the D70 goes into standby mode, the 70-200 won't draw any more power than say the kit lens In standby mode, it's really only powering the top display on the body (and some other stuff, but nothing consuming huge amounts of power).
Pehpsi - mine did this last year, and there was a definite problem .... it went off to Anderson's (in Brisbane) and was fixed in 2 days ....
but it definitely has to be fixed - this is not a good problem to have It's still under waranty???? Rel Dodging and burning are steps to take care of mistakes God made in establishing tonal relationships! -Ansel Adams
http://www.redbubble.com/people/blacknstormy
thanks for the reply's.
still won't turn off, but i just left it on all day (9hrs), took heaps of shots with my 70-200 (VR off), and the battery still reads full bars. gota love that nikon battery got the 3yr warranty for $100 extra. glad i did... cheers. Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
well, i'm know for fixing things, and i'm very tempted to give the D70 a crack.
what ya reckon? anyone opened a DSLR before? Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
forgot about that little detail! prob not worth the risk then...
Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
No problem with changing lenses with the power on. I do it all the time. As previous posters stated. Just leave it on. It'll last for months because the camera uses very little power when in idle mode. Of course, you have a second battery anyway?
Regards
Matt. K
will do.
i have my original battery (the best), a second nikon (not bad at all), and a cheapo, which drains then reloads after every shot. Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
i've decided to send it to the doctor...
where does one start this process? i bought it from harvey norman, do they have anything to do with it? or does it go straight to nikon? if so, i'm in sydney not far from town, anyone know my closest dikon doc? thanks Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
yeah, sounds like a wise option, i'm sure harvey norman wouldn't care too much..
Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
Depends on your extended warranty and who it is with. Check with the insurer as to what you should do - back to HN or direct to Nikon.
Chris
-------------------------------- I started my life with nothing and I’ve still got most of it left
on the HN receipt it just says:
"extended warranty sold, 24months, see manufactures documentation for warranty details" to me that says, go to nikon. Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
just spoke to nikon at bondi, they just said to drop it off with receipt and warranty card and that's it sounds simple enough...
Nikon D70
12-24 DX, 18-70 DX, 70-200 VR 20" iMac Intel C2D Aperture 2.1 PS CS3 http://www.jamesrobertphotography.com
Previous topic • Next topic
20 posts
• Page 1 of 1
|