4x5 goodness

[Reschsmooth]

Picked up a 4x5 bit of kit last weekend and finally had a chance to run some film through it.

Two different scenes - the one of Alicia using SB800 and Metz and the one of the wine outside (the vine on the fence is a grape vine, hence the inclusion).

Points of note:

1. Still learning movements and the Scheimpflug relationship and how to get good focus. I am using a 50 1.8 as a loupe and a D800 as a light meter!
2. The square shot of the wine shows light leaks - I am guessing this was human error in the loading of the film holder as it is does not appear in the other shots.

[Remorhaz]

The results of the light leak are interesting Patrick - you sure you didn't just have a big mirror on the ground

In the closer shot of Alicia I don't like how the focus goes so dramatically from sharp to blurred between the right and left sides of her face - interesting that you can do this sort of rapid decay like that tho

[Reschsmooth]

Thanks Rodney.

Re the focus on Alicia's face: it definitely was not my intention to have her right eye out of focus. I am still getting the hang of the focusing of the camera.

What is interesting is how the whole focusing process works. Y'see, as you probably know, the plane of sharp focus is perpendicular to the axis through the lens and therefore ordinarily parallel to the lens plane and film plane (apparently some of you guys use digital cameras, so replace "film plane" with sensor plane). With these cameras, you can move both the lens plane and film plane in pretty much all directions. This means that you can move the way the plane of sharp focus interacts with the film/sensor, and at angles other than 0'.

[biggerry]

how trippy is that focus plane in the first one of Alicia!

anywho, that one is my pick, however is it possible to bring back the highlights a bit, its a nice shot and she is well posed there.

[Remorhaz]

the plane of sharp focus is perpendicular to the axis through the lens and therefore ordinarily parallel to the lens plane and film plane (apparently some of you guys use digital cameras, so replace "film plane" with sensor plane). With these cameras, you can move both the lens plane and film plane in pretty much all directions

My brain hurts enough as it is without introducing tilts and shifts or even bellows. I'll have to add it to the ever growing list of things to learn and experiment with

[Reschsmooth]

the plane of sharp focus is perpendicular to the axis through the lens and therefore ordinarily parallel to the lens plane and film plane (apparently some of you guys use digital cameras, so replace "film plane" with sensor plane). With these cameras, you can move both the lens plane and film plane in pretty much all directions

My brain hurts enough as it is without introducing tilts and shifts or even bellows. I'll have to add it to the ever growing list of things to learn and experiment with

Don't google "Scheimpflug relationship" then, dealing with tilts and swings - it involves trigonometry!

[aim54x]

Lovely work there Patrick...that Cambo will be a nice addition to your kit!