Rainbow LoriModerators: Greg B, Nnnnsic, Geoff, Glen, gstark, Moderators
Forum rules
Please note that image critiquing is a matter of give and take: if you post images for critique, and you then expect to receive criticism, then it is also reasonable, fair and appropriate that, in return, you post your critique of the images of other members here as a matter of courtesy. So please do offer your critique of the images of others; your opinion is important, and will help everyone here enjoy their visit to far greater extent. Also please note that, unless you state something to the contrary, other members might attempt to repost your image with their own post processing applied. We see this as an acceptable form of critique, but should you prefer that others not modify your work, this is perfectly ok, and you should state this, either within your post, or within your signature. Images posted here should conform with the general forum guidelines. Image sizes should not exceed 950 pixels along the largest side (height or width) and typically no more than four images per post or thread. Please also ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.
Previous topic • Next topic
6 posts
• Page 1 of 1
Rainbow LoriShot this one this morning (with the camera).
Straight up at the sky with flash fill in using my 70-300 Tamron at 300mm. 1/1000s at F6 Although I like the colours of the bird, I am not sure about the purple haze along the branches. I assume it is from the strong backlight, but how to I stop it from happening in the first place or is it just a photoshop job to sort out? Cheers
Mark http://www.photographicaustralia.com http://www.trekaboutphotography.com He who dies with the most lenses wins...
Nice shot of the bird, Mark. It does look a touch underexposed though.
The purple fringing is a common problem with digital, where ever you have very high contrast, like dark branches against a bright sky. It's similar to chromatic aberration, in that a lot of it is caused by the lens. Some lenses exhibit the problem more than others. Lens coatings can reduce the problem, as well as stopping down in aperture. It's also said to be partly caused by an overflow on the sensor, from the bright area to the dark area. There are photoshop actions that can make it easier to reduce/eliminate the issue. Paint Shop Pro 9 has a native tool to handle it. my gallery of so-so photos
http://www.pbase.com/kerrypierce/
Thanks Kerry, I think it was just beyond the limits of the flash (way up in the tree) and I did bring the exposure up a couple of stops in Nilkon Capture. I have Paint Shop 9 but have been using Photoshop more. I'll have to have another look at it. Thanks for the tip. Cheers
Mark http://www.photographicaustralia.com http://www.trekaboutphotography.com He who dies with the most lenses wins...
Here is the same image after using the "Chromatic Aberration" tool. Very handy. Thanks again for the tip Kerry.
Cheers
Mark http://www.photographicaustralia.com http://www.trekaboutphotography.com He who dies with the most lenses wins...
That looks much cleaner. It's a useful tool. Glad I could help. my gallery of so-so photos
http://www.pbase.com/kerrypierce/
Previous topic • Next topic
6 posts
• Page 1 of 1
|